Reference number
ISO 14679:1997
International Standard
ISO 14679:1997
Adhesives — Measurement of adhesion characteristics by a three-point bending method
Edition 1
1997-09
Read sample
ISO 14679:1997
25226
Published (Edition 1, 1997)
This publication was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO 14679:1997

ISO 14679:1997
25226
Language
Format
CHF 63
Convert Swiss francs (CHF) to your currency

Abstract

This International Standard specifies a test method to determine the ability of a cured adhesive (if necessary with a primer) to adhere to a substrate with a certain surface finish, or which has been subjected to a specific surface preparation, using the "three-point bending method".

This standard is only applicable to quality assurance and only to substrates which are rigid or resistant enough to bending, such as steel or aluminium alloys. For other substrates, the thickness is adjusted to the modulus of elasticity or a suitable stiffener is used.

The adhesive is allowed to cure without the application of pressure in order to obtain the thickness needed to provide sufficient rigidity, otherwise a bonded reinforcing piece of the same material and the same thickness as the substrate is substituted for the block of adhesive.

This test method is not suitable for film adhesives.

General information

  •  : Published
     : 1997-09
    : International Standard confirmed [90.93]
  •  : 1
     : 11
  • ISO/TC 61/SC 11
    83.180 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support