Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 13 Secretariat Stage ICS
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
95.99
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
95.99
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
60.60
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
95.99
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
95.99
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
60.60
Plastics — Determination of tensile properties — Part 6: Measurement of strain distribution for randomly oriented chopped strand- or fibre- reinforced plastic composites
20.00
Textile glass reinforced plastics — Determination of loss on ignition
95.99
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
95.99
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
60.60
Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 3: Wet compression moulding
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs
90.20
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs — Amendment 1
60.60
Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
90.60
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
90.93
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
90.93
Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes
95.99
Textile glass — Method of sampling applicable to batches
95.99
Reinforcement fibres — Sampling plans applicable to received batches
95.99
Textile glass — Determination of combustible matter content
95.99
Textile glass — Determination of combustible-matter content
95.99
Textile glass — Determination of combustible-matter content
90.93
Textile glass — Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn — Cross-section method
95.99
Textile glass — Staple fibres or filaments — Determination of average diameter
95.99
Textile glass — Staple fibres or filaments — Determination of average diameter
95.99
Textile glass — Staple fibres or filaments — Determination of average diameter
60.60
Textile glass products — Continuous filament yarns, staple fibre yarns and rovings in the form of packages — Determination of linear density
95.99
Textile glass — Continuous filament yarns, staple fibre yarns, textured yarns and rovings (packages) — Determination of linear density
95.99
Reinforcement yarns — Determination of linear density
95.99
Reinforcement yarns — Determination of linear density
90.93
Textile glass — Continuous filament yarns and staple fibre yarns — Determination of twist
95.99
Reinforcement yarns — Determination of twist
95.99
Reinforcement yarns — Determination of twist
90.93
Textile glass — Yarns — Designation
95.99
Textile glass — Yarns — Designation
95.99
Textile glass — Yarns — Designation — Amendment 1
95.99
Textile glass — Yarns — Designation
60.60
Textile glass — Woven fabrics — Basis for specification
95.99
Reinforcement fibres — Woven fabrics — Basis for a specification
95.99
Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1
95.99
Reinforcement fibres — Woven fabrics — Requirements and specifications
60.60
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
95.99
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
90.93
Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification
95.99
Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification
95.99
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
95.99
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
90.93
Textile glass — Rovings — Basis for a specification
95.99
Textile glass — Rovings — Basis for a specification
90.93
Plastics — Glass reinforced materials — Determination of tensile properties
95.99
Textile glass — Yarns — Determination of breaking force and breaking elongation
95.99
Textile glass — Yarns — Determination of breaking force and breaking elongation
90.93
Textile glass — Mats — Determination of tensile breaking force
95.99
Textile glass — Mats — Determination of tensile breaking force
95.99
Textile glass — Mats — Determination of tensile breaking force
90.93
Textile glass — Yarns — Determination of twist balance index
95.99
Reinforcement yarns — Determination of twist balance index
90.93
Textile glass products — Determination of moisture content
95.99
Reinforcement products — Determination of moisture content
90.93
Textile glass — Glass mats — Determination of mass per unit area
95.99
Textile glass mats — Determination of mass per unit area
95.99
Reinforcement products — Mats and fabrics — Determination of mass per unit area
90.93
Textile glass — Determination of stiffness of rovings
95.99
Textile glass — Determination of stiffness of rovings
90.93
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
95.99
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
90.20
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
95.99
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
90.20
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
95.99
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
90.20
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
95.99
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
90.20
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of flexural (cross-breaking) strength
95.99
Textile glass — Yarns — Basis for a specification
95.99
Textile glass — Yarns — Basis for a specification
90.93
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
95.99
Textile glass — Rovings — Determination of compressive strength of rod composites
95.99
Textile glass — Mats — Determination of average thickness, thickness under load and recovery after compression
95.99
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
95.99
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1
95.99
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
60.60
Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
60.60
Textile glass reinforced plastics — Determination of apparent interlaminar shear properties by short-beam test
95.99
Textile glass — Woven fabrics — Determination of number of yarns per unit length of warp and weft
95.99
Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft
95.99
Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft
90.93
Textile glass — Woven fabrics — Determination of thickness
95.99
Textile glass — Woven fabrics — Determination of thickness
90.93
Textile glass — Woven fabrics — Determination of thickness — Amendment 1
60.60
Textile glass — Woven fabrics — Determination of conventional flexural stiffness — Fixed angle flexometer method
95.99
Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method
90.93
Textile glass — Woven fabrics — Determination of mass per unit area
95.99
Textile glass — Woven fabric — Determination of tensile breaking force and breaking elongation by the strip method
95.99
Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method
90.93
Textile glass reinforced thermosetting plastics — Properties and test methods
95.99
Textile-glass-reinforced thermosetting plastics — Properties and test methods
90.60
Textile glass — Mats and fabrics — Determination of contact mouldability
95.99
Textile glass — Mats and fabrics — Determination of contact mouldability
90.93
Textile glass — Woven fabric — Determination of width and length
95.99
Reinforcement products — Woven fabrics — Determination of width and length
95.99
Reinforcement products — Woven fabrics — Determination of width and length
90.93
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
90.93
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution
60.60
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
60.60
Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation
60.60
Fibre-reinforced plastic composites — Non-destructive testing — Part 2: Array and air-coupled ultrasonics
40.00
Fibre-reinforced plastics — Non-destructive inspection techniques — Part 3: Active thermography
30.99
Fibre-reinforced plastic composites — Non-destructive inspection — Part 4: Laser shearography
40.00
Fibre-reinforced plastics — Non-destructive inspection techniques — Part 5: Microwave
30.99
Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination
95.99
Textile glass — Textured yarns — Basis for a specification
95.99
Textile glass — Textured yarns — Basis for a specification
90.93
Textile glass reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
95.99
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
95.99
Fibre-reinforced plastics — Sheet moulding compound (SMC) — Requirements and specifications
60.60
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
90.92
Fibre-reinforced plastics — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
40.60
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
95.99
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
90.60
Textile-glass-reinforced plastics — Rovings — Preparation of unidirectional plates by winding
95.99
Glass-reinforced plastics — Preparation of plates with unidirectional reinforcements by bag moulding
95.99
Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content
90.60
Carbon fibre — Determination of density
95.99
Carbon fibre — Determination of density
95.99
Carbon fibre — Determination of density
60.60
Carbon fibre — Determination of linear density
95.99
Reinforcement materials — Tubular braided sleeves — Basis for a specification
95.99
Reinforcement materials — Tubular braided sleeves — Basis for a specification
90.93
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
95.99
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
95.99
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
95.99
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
60.60
Reinforcement materials — Braided tapes — Basis for a specification
90.60
Carbon fibre — Determination of size content
95.99
Carbon fibre — Determination of size content
90.93
Carbon fibre — Determination of size content — Technical Corrigendum 1
60.60
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
95.99
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
90.93
Carbon fibre — Determination of the tensile properties of single-filament specimens
90.93
Carbon fibre — Determination of filament diameter and cross-sectional area
95.99
Carbon fibre — Determination of filament diameter and cross-sectional area
90.93
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
90.93
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
90.93
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life
90.93
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life — Technical Corrigendum 1
60.60
Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
90.92
Fibre-reinforced plastics — Determination of the plain-pin bearing strength
40.99
Fibre-reinforced plastic composites — Determination of open-hole compression strength
90.92
Fibre-reinforced plastic composites — Determination of open-hole compression strength
40.99
Carbon fibre — Designation system for filament yarns
90.93
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions
90.20
Tensile test of fibre reinforced monolayer flat specimens
20.60
Composites and reinforcement fibres – Carbon fibre reinforced plastics (CFRPs) and metal assemblies – Combined stress test
40.20
Plastics — Guide to the writing of test methods
90.93
Carbon fibre — Determination of volume resistivity
90.93
Fibre-reinforced plastic composites — Determination of flexural properties
90.20
Fibre-reinforced plastic composites — Determination of flexural properties — Amendment 1
60.60
Fibre-reinforced plastic composites — Determination of flexural properties — Technical Corrigendum 1
60.60
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
95.99
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction — Technical Corrigendum 1
95.99
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
60.60
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
95.99
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
60.60
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
90.93
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
90.93
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method — Technical Corrigendum 1
60.60
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
95.99
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
60.60
Composites — Prepregs — Determination of resin flow
90.93
Textile-glass rovings — Determination of solubility of size
90.20
Textile-glass rovings — Determination of solubility of size — Amendment 1
60.60
Composites — Prepregs — Determination of gel time
90.93
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
90.93
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
90.20
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method
90.93
Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
90.93
Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level
90.93
Recycled carbon fibre — Determination of tensile strength distribution and interfacial shear strength of single filament embedded in matrix polymer
50.00
Recycled carbon fibres — Designation system for recycled carbon fibres
30.20
Fibre-reinforced composites — Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test
60.00
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
90.60
Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
90.20
Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
90.93
Fibre-reinforced plastic composites — Determination of laminate through-thickness properties — Part 1: Direct tension and compression tests
60.60
Fibre-reinforced plastic compositess — Determination of laminate through-thickness properties — Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
90.93
Composites and metal assemblies — Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres — Salt spray tests
90.93
Plastics — Glass-fibre-reinforced products — Determination of fibre length
95.99
Plastics — Glass-fibre-reinforced products — Determination of fibre length
60.60
Carbon-fibre-reinforced composites — Determination of fibre weight content by thermogravimetry (TG)
60.60
Fibre-reinforced composites — Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
60.60
Composites and reinforcements fibres — Determination of the fracture energy of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
60.60
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength
60.60
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength — Amendment 1: Precision data
60.60
Carbon fibres — Determination of polyacrylonitrile-based (PAN-based) carbon fibre tow characteristics — Heat transfer parameter
60.60
Laminates and moulding compounds — Prepregs — Determination of tack
60.60
Fibre-reinforced plastic composites — Full-section compressive test for pultruded profiles
60.60
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
60.60
Experimental characterisation of the compaction response of fibrous reinforcements for liquid composite moulding
20.00
Test method for the experimental characterisation of out-of-plane permeability of fibrous reinforcements for liquid composite moulding
20.00
Glass fibre — Determination of density
20.00
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Test method for cross-tension fatigue properties
20.00
Composites and reinforcements fibres — Determination of mode I fracture toughness of structural adhesive joints at high loading rates
20.00
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies --Evaluation of fatigue crack growth of bonded plates using double cantilever beam specimens under mode I (opening mode) loading
20.00
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects
90.93
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1
60.60

No matching records found. Please try changing the filter settings.