Reference number
ISO 13318-3:2004
International Standard
ISO 13318-3:2004
Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 3: Centrifugal X-ray method
Edition 1
2004-07
Preview
ISO 13318-3:2004
31503
недоступно на русском языке
Опубликовано (Версия 1, 2004)
Последний раз этот публикация был пересмотрен в  2020. Поэтому данная версия остается актуальной.

ISO 13318-3:2004

ISO 13318-3:2004
31503
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 13318-3:2004 describes a method for determining the particle size distributions of homogeneous particulate material using centrifugal sedimentation in a liquid. Solids concentrations are determined by the attenuation of an X-ray beam. The resulting signal enables conversion to a particle size distribution.

The method of determining the particle size distribution described in this standard is applicable to powders which can be dispersed in liquids or powders which are present in slurry form. The typical particle size range for analysis is from 0,1 m to 5 m. The method is applicable to powders in which all particles have the same effective density, chemical composition and comparable shapes. Materials possessing elements with an atomic number greater than about 12 can be expected to produce adequate X-ray opacity. Particles should not undergo chemical or physical change in the suspension liquid. It is necessary that the particles have a higher density than that of the liquid.

Общая информация

  •  : Опубликовано
     : 2004-07
    : Подтверждение действия международного стандарта [90.93]
  •  : 1
  • ISO/TC 24/SC 4
    19.120 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ