Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 107/SC 3 | Electrodeposited coatings and related finishes | 26 | 5 |
ISO/TC 107/SC 4 | Hot dip coatings (galvanized, etc.) | 6 | 1 |
ISO/TC 107/SC 7 | Corrosion tests | 15 | 0 |
ISO/TC 107/SC 8 | Chemical conversion coatings | 6 | 0 |
ISO/TC 107/SC 9 | Physical vapor deposition coatings | 6 | 3 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 107 Секретариата | Этап | ICS |
---|---|---|
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
95.99 | |
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
95.99 | |
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
60.60 | |
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
|
95.99 | |
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
|
90.60 | |
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
|
90.92 | |
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
|
30.00 |
|
Metallic coatings — Protection of iron and steel against corrosion — Metal spraying of zinc and aluminium
|
95.99 | |
Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys
|
95.99 | |
Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
|
95.99 | |
Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness
|
95.99 | |
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
|
90.93 | |
Surface treatment and metallic coatings — General classification of terms
|
95.99 | |
Electroplating and related processes — Vocabulary
|
95.99 | |
Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
|
95.99 | |
Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
|
60.60 | |
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
|
95.99 | |
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
|
95.99 | |
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
|
90.93 | |
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
|
95.99 | |
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
|
90.93 | |
Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method
|
95.99 | |
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
|
95.99 | |
Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
|
90.93 | |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
|
90.92 | |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
|
40.20 | |
Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature
|
95.99 | |
Vitreous and porcelain enamels for sheet steel — Production of specimens for testing
|
95.99 | |
Vitreous and porcelain enamels for sheet steel — Production of specimens for testing
|
95.99 | |
Vitreous and porcelain enamels for cast iron — Production of specimens for testing
|
95.99 | |
Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours
|
95.99 | |
Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids
|
95.99 | |
Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to boiling citric acid
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to boiling citric acid
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to boiling hydrochloric acid
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide
|
95.99 | |
Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test
|
95.99 | |
Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test
|
95.99 | |
Vitreous and porcelain enamels — High voltage test
|
90.93 | |
Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
|
95.99 | |
Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
|
90.93 | |
Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
|
95.99 | |
Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
|
90.93 | |
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
|
95.99 | |
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
|
95.99 | |
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
|
90.93 | |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
|
95.99 | |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
|
90.93 | |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1
|
60.60 | |
Chromate conversion coatings on zinc and cadmium — Test methods
|
95.99 | |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
95.99 | |
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
95.99 | |
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
60.60 | |
Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
|
90.93 | |
Metallic and other non-organic coatings — Review of methods of measurement of thickness
|
95.99 | |
Metallic and other non-organic coatings — Review of methods of measurement of thickness
|
95.99 | |
Metallic and other inorganic coatings — Review of methods of measurement of thickness
|
95.99 | |
Metallic and other inorganic coatings — Review of methods of measurement of thickness
|
60.60 | |
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
|
95.99 | |
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
|
90.93 | |
High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components — Guidance with requirements
|
60.60 | |
Metallic and related coatings — Vickers and Knoop microhardness tests
|
95.99 | |
Metallic coatings — Measurement of coating thickness — Profilometric method
|
95.99 | |
Metallic coatings — Measurement of coating thickness — Profilometric method
|
60.60 | |
Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes
|
90.93 | |
Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles
|
95.99 | |
Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
|
95.99 | |
Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles
|
60.60 | |
Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat
|
95.99 | |
Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat
|
60.60 | |
Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 1: Method of test
|
95.99 | |
Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 2: Permissible limits
|
95.99 | |
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
|
95.99 | |
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
|
60.60 | |
Vitreous and porcelain enamels — Determination of the resistance of enamelled articles to impact — Pistol test
|
90.93 | |
Vitreous and porcelain enamels — Determination of resistance to hot detergent solutions used for washing textiles
|
95.99 | |
Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
|
95.99 | |
Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
|
90.93 | |
Vitreous and porcelain enamels — Apparatus for determination of resistance to hot detergent solutions used for washing textiles
|
95.99 | |
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 1: Abrasion testing apparatus
|
90.93 | |
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
|
95.99 | |
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
|
95.99 | |
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
|
60.60 | |
Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
|
60.60 | |
Metallic coatings for electromagnetic interference shielding — Designation and characterization method
|
60.60 | |
Atomic layer deposition — Vocabulary
|
60.60 | |
Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 1: Swab test for non-profiled surfaces
|
60.60 | |
Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 2: Slurry test for profiled surfaces
|
90.93 | |
Vitreous and porcelain enamels — Low voltage test for detecting and locating defects
|
95.99 | |
Vitreous and porcelain enamels — Low voltage test for detecting and locating defects
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature
|
95.99 | |
Vitreous and porcelain enamels — Method of test of self-cleaning properties
|
90.93 | |
Metallic coatings — Review of methods of measurement of ductility
|
95.99 | |
Metallic coatings — Review of methods of measurement of ductility
|
90.93 | |
Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
|
95.99 | |
Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
|
60.60 | |
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
|
95.99 | |
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
|
90.93 | |
Metallic and other inorganic coatings — Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method
|
90.93 | |
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
|
95.99 | |
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
|
90.60 | |
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions
|
90.93 | |
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
|
95.99 | |
Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings
|
60.60 | |
Thermal spraying — Recommendations for thermal spraying
|
90.93 | |
Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
|
90.93 | |
Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
|
90.93 | |
Vitreous and porcelain enamels for aluminium — Production of specimens for testing
|
95.99 | |
Vitreous and porcelain enamels for aluminium — Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
|
90.93 | |
Vitreous and porcelain enamels — Corrosion tests in closed systems
|
95.99 | |
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
|
95.99 | |
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry — Technical Corrigendum 1
|
95.99 | |
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
|
60.60 | |
Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
|
90.93 | |
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
|
90.93 | |
Thermal spraying — Acceptance inspection of thermal spraying equipment
|
90.93 | |
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
|
90.92 | |
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
|
30.00 |
|
Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry
|
60.60 | |
Thermal spraying — Powders — Composition and technical supply conditions
|
95.99 | |
Metallic coatings on non-metallic basis materials — Measurement of coating thickness — Micro-resistivity method
|
60.60 | |
Thermal spraying — Determination of tensile adhesive strength
|
95.99 | |
Thermal spraying — Determination of tensile adhesive strength
|
90.93 | |
Thermal spraying — Terminology, classification
|
95.99 | |
Thermal spraying — Terminology, classification
|
90.93 | |
Thermal spraying — Approval testing of thermal sprayers
|
95.99 | |
Thermal spraying — Qualification testing of thermal sprayers
|
90.92 | |
Thermal spraying — Qualification testing of thermal sprayers
|
30.00 |
|
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
|
95.99 | |
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
|
95.99 | |
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions
|
60.60 | |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
95.99 | |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
95.99 | |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
60.60 | |
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
|
95.99 | |
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
|
90.93 | |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use
|
95.99 | |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements
|
95.99 | |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements
|
95.99 | |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements
|
95.99 | |
Thermal spraying — Quality requirements for manufacturers of thermal sprayed coatings
|
60.60 | |
Thermal spraying — Characterization and testing of thermally sprayed coatings
|
90.93 | |
Thermal spraying — Post-treatment and finishing of thermally sprayed coatings
|
90.93 | |
Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes
|
90.20 | |
Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes — Technical Corrigendum 1
|
60.60 | |
Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
|
90.93 | |
Metallic and other inorganic coatings — Definitions and conventions concerning appearance
|
90.93 | |
Metallic and other inorganic coatings — Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
|
60.60 | |
Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures
|
90.93 | |
Thermal spraying — Determination of the deposition efficiency for thermal spraying
|
95.99 | |
Thermal spraying — Determination of the deposition efficiency for thermal spraying
|
90.93 | |
Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
|
90.93 | |
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings
|
90.93 | |
Thermal spraying — Classification method of adhesive strength by indentation
|
90.93 | |
Atomic Layer Deposition-- Chemical characteristics and related process specifications of atomic layer deposition precursors
|
20.60 |
|
Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending
|
90.93 | |
Vitreous and porcelain enamels — Terminology — Part 1: Terms and definitions
|
90.93 | |
Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and descriptions
|
90.93 | |
Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation
|
90.93 | |
Vitreous and porcelain enamels — Preparation of samples and determination of thermal expansion coefficient
|
90.93 | |
Carbon based films — Classification and designations
|
90.93 | |
Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion
|
90.93 | |
Specification and requirements of thermal spray coatings for power plant boiler tubes
|
40.60 | |
Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy
|
40.60 | |
Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
|
40.60 | |
Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
|
95.99 | |
Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
|
90.20 | |
Metallic and other inorganic coatings — Measurement of the linear thermal expansion coefficient of thermal barrier coatings
|
60.60 | |
Ellipsometry — Part 2: Bulk material model
|
30.60 |
|
Ellipsometry — Part 3: Transparent single layer model
|
30.60 |
|
Ellipsometry — Principles
|
60.60 | |
Carbon based films — Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry
|
60.60 | |
Metallic and other inorganic coatings — Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
|
60.60 | |
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings at elevated temperature
|
60.60 | |
Peel strength of metallic coatings on plastics — Designation and test method under controlled temperatures
|
20.00 |
|
Corrosion protection of offshore wind structures — Part 1: Design considerations
|
20.00 |
|
Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting
|
20.00 |
|
Corrosion protection of offshore wind structures — Part 3: Primary steel components — Supplementary requirements for Foundations
|
20.00 |
|
Corrosion protection of offshore wind structures — Part 4: Primary steel components — Supplementary requirements for Towers
|
20.00 |
|
Corrosion protection of offshore wind structures — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly
|
20.00 |
|
Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy
|
95.99 | |
Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy
|
90.93 | |
Standard method for porosity measurement of thermally sprayed coatings
|
60.60 | |
Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
|
90.93 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature
|
90.93 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
|
90.92 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
|
20.00 |
|
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
|
90.93 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
|
90.92 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
|
20.00 |
|
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
|
95.99 | |
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
|
90.93 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories
|
95.99 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories
|
90.20 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
|
95.99 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
|
90.92 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
|
40.99 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3: Thermal shock resistance
|
90.93 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
|
95.99 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
|
90.93 | |
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects
|
90.93 | |
Vitreous and porcelain enamels — Characteristics of enamel coatings applied to steel panels intended for architecture
|
90.93 | |
Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers
|
90.93 | |
Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification
|
95.99 | |
Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification
|
90.93 | |
Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications
|
95.99 | |
Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications
|
90.20 | |
Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
|
95.99 | |
Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
|
90.93 | |
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
|
95.99 | |
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
|
95.99 | |
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
|
60.60 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.