Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 76 Секретариата | Этап | ICS |
---|---|---|
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
|
95.99 | |
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
|
95.99 | |
Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
|
60.60 | |
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
|
95.99 | |
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
|
95.99 | |
Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
|
60.60 | |
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps
|
95.99 | |
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and caps
|
95.99 | |
Transfusion equipment for medical use — Part 3: Blood-taking set
|
95.99 | |
Transfusion equipment for medical use — Part 3: Blood-taking sets for single use
|
90.93 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
|
95.99 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
|
95.99 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
|
95.99 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
|
95.99 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
|
95.99 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
|
90.92 | |
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
|
50.00 | |
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
|
90.92 | |
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
|
50.00 | |
Transfusion equipment for medical use
|
95.99 | |
Glass syringes — Determination of extractable tungsten
|
60.60 | |
Glass transfusion bottles for medical use — Chemical resistance
|
95.99 | |
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
|
95.99 | |
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
|
95.99 | |
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
|
90.20 | |
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1
|
60.60 | |
Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets
|
90.92 | |
Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets
|
30.99 | |
Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features
|
90.92 | |
Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features
|
30.99 | |
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
|
90.92 | |
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
|
30.99 | |
Plastics collapsible containers for human blood and blood components
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
|
60.60 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
|
95.99 | |
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
|
60.60 | |
Single use blood specimen containers up to 25 ml capacity
|
95.99 | |
Single-use containers for venous blood specimen collection
|
95.99 | |
Single-use containers for human venous blood specimen collection
|
90.93 | |
In vitro diagnostic medical devices — Single-use containers for the collection of specimens from humans other than blood
|
60.60 | |
Injection containers for injectables and accessories — Part 1: Injection vials made of glass tubing
|
95.99 | |
Injection containers and accessories — Part 1: Injection vials made of glass tubing
|
95.99 | |
Injection containers and accessories — Part 1: Injection vials made of glass tubing
|
95.99 | |
Injection containers and accessories — Part 1: Injection vials made of glass tubing — Amendment 1
|
95.99 | |
Injection containers and accessories — Part 1: Injection vials made of glass tubing
|
90.93 | |
Injection containers for injectables and accessories — Part 2: Closures for injection vials
|
95.99 | |
Injection containers and accessories — Part 2: Closures for injection vials
|
95.99 | |
Injection containers and accessories — Part 2: Closures for injection vials
|
95.99 | |
Injection containers and accessories — Part 2: Closures for injection vials — Amendment 1
|
95.99 | |
Injection containers and accessories — Part 2: Closures for injection vials
|
60.60 | |
Injection containers for injectables and accessories — Part 3: Aluminium caps for injection vials
|
95.99 | |
Injection containers and accessories — Part 3: Aluminium caps for injection vials
|
90.93 | |
Injection containers for injectables and accessories — Part 4: Injection vials made of moulded glass
|
95.99 | |
Injection containers and accessories — Part 4: Injection vials made of moulded glass
|
95.99 | |
Injection containers and accessories — Part 4: Injection vials made of moulded glass
|
90.93 | |
Injection containers for injectables and accessories — Part 5: Freeze drying closures for injection vials
|
95.99 | |
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
|
95.99 | |
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
|
90.93 | |
Injection containers for injectables and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
|
95.99 | |
Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
|
90.93 | |
Injection containers for injectables and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
|
95.99 | |
Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
|
90.93 | |
Risk management of particulate contamination for devices with intravascular access
|
60.60 | |
Infusion equipment for medical use — Part 1: Infusion glass bottles
|
95.99 | |
Infusion equipment for medical use — Part 1: Infusion glass bottles
|
95.99 | |
Infusion equipment for medical use — Part 1: Infusion glass bottles — Amendment 1
|
95.99 | |
Infusion equipment for medical use — Part 1: Infusion glass bottles
|
95.99 | |
Infusion equipment for medical use — Part 1: Infusion glass bottles
|
90.93 | |
Infusion equipment for medical use — Part 2: Closures for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 2: Closures for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 2: Closures for infusion bottles — Technical Corrigendum 1
|
95.99 | |
Infusion equipment for medical use — Part 2: Closures for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 2: Closures for infusion bottles
|
60.60 | |
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
|
90.20 | |
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles — Amendment 1
|
60.60 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed — Amendment 1
|
95.99 | |
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
|
90.20 | |
Infusion equipment for medical use — Part 5: Burette type infusion sets
|
95.99 | |
Infusion equipment for medical use — Part 5: Burette infusion sets for single use, gravity feed
|
90.92 | |
Infusion equipment for medical use — Part 5: Burette infusion sets for single use, gravity feed
|
20.00 |
|
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
|
90.92 | |
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
|
40.99 | |
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
|
95.99 | |
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
|
90.20 | |
Infusion equipment for medical use — Part 8: Infusion equipment for use with pressure infusion apparatus
|
95.99 | |
Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion apparatus
|
90.93 | |
Infusion equipment for medical use — Part 9: Fluid lines for use with pressure infusion equipment
|
95.99 | |
Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment
|
90.93 | |
Infusion equipment for medical use — Part 10: Accessories for fluid lines for use with pressure infusion equipment
|
95.99 | |
Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment
|
90.93 | |
Infusion equipment for medical use — Part 11: Infusion filters for use with pressure infusion equipment
|
95.99 | |
Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment
|
90.93 | |
Infusion equipment for medical use — Part 12: Check valves
|
95.99 | |
Infusion equipment for medical use — Part 12: Check valves — Amendment 1
|
95.99 | |
Infusion equipment for medical use — Part 12: Check valves for single use
|
60.60 | |
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
|
95.99 | |
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
|
60.60 | |
Infusion equipment for medical use — Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
|
90.93 | |
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use
|
60.60 | |
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use — Amendment 1
|
60.60 | |
Infusion equipment for medical use — Part 16: Infusion sets for single use with volumetric infusion controllers
|
40.60 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates
|
90.20 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
|
95.99 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization — Amendment 1
|
95.99 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
|
60.60 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
|
90.20 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count — Amendment 1
|
60.60 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 4: Biological requirements and test methods
|
90.93 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
|
95.99 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
|
90.92 | |
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
|
40.99 | |
Elastomeric parts for aqueous parenteral preparations
|
95.99 | |
Elastomeric parts for aqueous parenteral preparations
|
95.99 | |
Elastomeric parts for aqueous parenteral preparations — Amendment 1
|
95.99 | |
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
|
95.99 | |
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
|
95.99 | |
Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
|
60.60 | |
Injection equipment for medical use — Part 1: Ampoules for injectables
|
95.99 | |
Injection equipment for medical use — Part 1: Ampoules for injectables
|
95.99 | |
Injection equipment for medical use — Part 1: Ampoules for injectables
|
95.99 | |
Injection equipment for medical use — Part 1: Ampoules for injectables
|
90.93 | |
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
|
95.99 | |
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
|
90.93 | |
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
|
95.99 | |
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
|
95.99 | |
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
|
95.99 | |
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
|
95.99 | |
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
|
90.93 | |
Prefilled syringes — Part 2: Plungers and discs for dental local anaesthetic cartridges
|
95.99 | |
Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges
|
90.93 | |
Prefilled syringes — Part 3: Aluminium caps for dental local anaesthetic cartridges
|
95.99 | |
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
|
90.92 | |
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
|
40.00 | |
Prefilled syringes — Part 4: Glass barrels for injectables
|
95.99 | |
Prefilled syringes — Part 4: Glass barrels for injectables
|
95.99 | |
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
|
95.99 | |
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling — Amendment 1
|
95.99 | |
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
|
60.60 | |
Prefilled syringes — Part 5: Plungers for injectables
|
95.99 | |
Prefilled syringes — Part 5: Plungers for injectables
|
95.99 | |
Prefilled syringes — Part 5: Plunger stoppers for injectables
|
90.92 | |
Prefilled syringes — Part 5: Plunger stoppers for injectables
|
20.00 |
|
Prefilled syringes — Part 6: Plastic barrels for injectables
|
95.99 | |
Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
|
90.93 | |
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
|
95.99 | |
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
|
60.60 | |
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
|
90.92 | |
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
|
30.20 |
|
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing bottles
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
|
90.93 | |
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck bottles for syrups
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
|
90.93 | |
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups — Amendment 1
|
60.60 | |
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck bottles (veral) for solid and liquid dosage forms
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
|
90.93 | |
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms — Amendment 1
|
60.60 | |
Containers and accessories for pharmaceutical preparations — Part 4: Tablet bottles
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles
|
90.93 | |
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
|
90.93 | |
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
|
95.99 | |
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
|
90.93 | |
Pen systems — Part 1: Glass cylinders for insulin pen-injectors
|
95.99 | |
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
|
95.99 | |
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
|
95.99 | |
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
|
90.92 | |
Cartridge systems — Part 1: Glass cylinders for cartridge-type needle-based injection systems (NIS) for medical use
|
30.20 |
|
Pen systems — Part 2: Plungers and discs for pen-injectors for medical use
|
95.99 | |
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
|
95.99 | |
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1
|
95.99 | |
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
|
90.92 | |
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
|
20.00 |
|
Pen systems — Part 3: Seals for pen-injectors for medical use
|
95.99 | |
Pen systems — Part 3: Seals for pen-injectors for medical use
|
90.93 | |
Disposable hanging devices for transfusion and infusion bottles — Requirements and test methods
|
90.93 | |
Self-adhesive hanging devices for infusion bottles and injection vials — Requirements and test methods
|
90.20 | |
Hanging devices for multiple use with infusion bottles — Requirements and test methods
|
95.99 | |
Medical infusion bottles — Suspension devices for multiple use — Requirements and test methods
|
90.93 | |
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
|
95.99 | |
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
|
95.99 | |
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
|
95.99 | |
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
|
90.93 | |
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) — Amendment 1: Climate action changes
|
60.60 | |
Plastics containers for intravenous injection
|
95.99 | |
Plastic containers for intravenous injections
|
95.99 | |
Plastic containers for intravenous injections
|
90.92 | |
Plastic containers for intravenous injections
|
30.99 | |
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the Blow-Fill-Seal (BFS) process
|
95.99 | |
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
|
90.93 | |
Medical devices — Infusate compatibility — Requirements and assessment methods
|
20.00 |
|
Medical devices — Pump tube spallation test — General procedure
|
60.60 | |
Sterile packaged ready for filling glass cartridges
|
90.92 | |
Sterile packaged ready for filling glass cartridges — Amendment 1
|
30.98 | |
Sterile packaged ready for filling glass cartridges
|
20.00 |
|
Sterile packaged ready for filling glass vials
|
90.92 | |
Sterile packaged ready for filling glass vials
|
20.00 |
|
Transfer sets for pharmaceutical preparations — Requirements and test methods
|
95.99 | |
Transfer sets for pharmaceutical preparations — Requirements and test methods
|
95.99 | |
Transfer sets for pharmaceutical preparations — Requirements and test methods
|
60.60 | |
Medical devices — Transfusion set and blood bag compatibility test method
|
90.93 | |
Aerosol bacterial retention test method for air-inlet filter on administration devices
|
60.60 | |
Snap-on bottles for metering pumps — Part 1: Tubular glass
|
60.60 | |
Snap-on bottles for metering pumps — Part 2: Moulded glass
|
60.60 | |
Snap-on bottles for metering pumps — Part 3: Plastic
|
60.60 | |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications
|
20.00 |
|
Medical devices — Non-electrically driven portable infusion devices
|
95.99 | |
Medical devices — Non-electrically driven portable infusion devices
|
60.60 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.