Reference number
ISO 17123-6:2022
International Standard
ISO 17123-6:2022
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
Edition 3
2022-05
Preview
ISO 17123-6:2022
78133
Indisponible en français
Publiée (Edition 3, 2022)

ISO 17123-6:2022

ISO 17123-6:2022
78133
Langue
Format
CHF 151
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature.

This document can be considered as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of parameters. Therefore this document differentiates between different measures of accuracy and objectives in testing, like repeatability and reproducibility (between-day repeatability), and of course gives a thorough assessment of all possible error sources, as prescribed by ISO/IEC Guide 98‑3 and ISO 17123‑1.

These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences.

Informations générales

  •  : Publiée
     : 2022-05
    : Norme internationale à réviser [90.92]
  •  : 3
  • ISO/TC 172/SC 6
    17.180.30 
  • RSS mises à jour

Prochaine édition en cours d'élaboration

Draft
International Standard
ISO/DIS 17123-6
Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 6: Lasers rotatifs
Reference number
ISO/DIS 17123-6
Edition 1
Projet Norme internationale

ISO/DIS 17123-6

Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation

Partie 6: Lasers rotatifs

ISO/DIS 17123-6

ISO/DIS 17123-6
88072
Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Vous avez une question?

Consulter notre Aide et assistance