Filter :
| Standard and/or project under the direct responsibility of ISO/TC 6/SC 2 Secretariat | Stage | ICS |
|---|---|---|
|
Paper and board — Sampling to determine average quality
|
95.99 | |
|
Paper and board — Sampling to determine average quality
|
95.99 | |
|
Paper and board — Sampling to determine average quality
|
90.92 | |
|
Paper and board — Sampling to determine average quality
|
20.00 |
|
|
Paper and board — Conditioning of samples
|
95.99 | |
|
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
|
95.99 | |
|
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
|
60.60 | |
|
Paper and board — Determination of moisture content — Oven-drying method
|
95.99 | |
|
Paper and board — Determination of moisture content of a lot — Oven-drying method
|
95.99 | |
|
Paper and board — Determination of moisture content of a lot — Oven-drying method
|
90.92 | |
|
Paper and board — Determination of moisture content of a lot — Oven-drying method
|
20.00 |
|
|
Paper — Determination of bulking thickness and apparent density
|
95.99 | |
|
Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board)
|
95.99 | |
|
Paper and board — Determination of thickness and apparent bulk density or apparent sheet density
|
95.99 | |
|
Paper and board — Determination of thickness, density and specific volume
|
95.99 | |
|
Paper and board — Determination of thickness, density and specific volume
|
90.93 | |
|
Paper and board — Determination of water absorption — Cobb method
|
95.99 | |
|
Paper and board — Determination of water absorptiveness — Cobb method
|
95.99 | |
|
Paper and board — Determination of water absorptiveness — Cobb method
|
95.99 | |
|
Paper and board — Determination of water absorptiveness — Cobb method
|
60.60 | |
|
Paper and board — Determination of grammage
|
95.99 | |
|
Paper and board — Determination of grammage
|
95.99 | |
|
Paper and board — Determination of grammage
|
95.99 | |
|
Paper and board — Determination of grammage
|
90.20 | |
|
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
|
95.99 | |
|
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
|
95.99 | |
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
|
95.99 | |
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
|
95.99 | |
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
|
90.92 | |
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
|
20.00 |
|
|
Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)
|
90.93 | |
|
Paper — Determination of tearing resistance
|
95.99 | |
|
Paper — Determination of tearing resistance (Elmendorf method)
|
95.99 | |
|
Paper — Determination of tearing resistance — Elmendorf method
|
90.93 | |
|
Paper and board — Determination of ash
|
95.99 | |
|
Paper and board — Determination of ash
|
95.99 | |
|
Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection
|
90.60 | |
|
Paper and board — Determination of bending resistance — Part 2: Taber-type tester
|
95.99 | |
|
Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
|
60.60 | |
|
Paper and board — Determination of stiffness — Static bending method
|
95.99 | |
|
Paper and board — Determination of resistance to bending
|
95.99 | |
|
Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method
|
95.99 | |
|
Sheet materials — Determination of water vapour transmission rate — Dish method
|
95.99 | |
|
Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method
|
95.99 | |
|
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
|
90.92 | |
|
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
|
20.60 |
|
|
Paper — Determination of bursting strength
|
95.99 | |
|
Paper — Determination of bursting strength
|
95.99 | |
|
Paper — Determination of bursting strength
|
90.93 | |
|
Board — Determination of bursting strength
|
95.99 | |
|
Board — Determination of bursting strength
|
95.99 | |
|
Board — Determination of bursting strength
|
90.20 | |
|
Corrugated fibreboard — Determination of thickness
|
95.99 | |
|
Corrugated fibreboard — Determination of single sheet thickness
|
90.93 | |
|
Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance
|
95.99 | |
|
Corrugated fibreboard — Determination of flat crush resistance
|
90.92 | |
|
Corrugated fibreboard — Determination of flat crush resistance
|
40.99 | |
|
Board — Determination of puncture resistance
|
90.92 | |
|
Board — Determination of puncture resistance using a pendulum device
|
50.20 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance
|
95.99 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method)
|
95.99 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
|
95.99 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
|
95.99 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance (non-waxed edge method)
|
60.60 | |
|
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
|
90.92 | |
|
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
|
20.00 |
|
|
Corrugated fibreboard — Determination of the grammage of the component papers after separation
|
95.99 | |
|
Corrugated fibreboard — Determination of grammage of the component papers after separation
|
90.93 | |
|
Paper and board — Determination of air resistance (Gurley)
|
95.99 | |
|
Paper and board — Determination of bursting strength after immersion in water
|
95.99 | |
|
Paper and board — Determination of bursting strength after immersion in water
|
60.60 | |
|
Paper — Preparation of a letterpress print for test purposes
|
95.99 | |
|
Paper and board — Determination of tensile strength after immersion in water
|
95.99 | |
|
Paper and board — Determination of tensile strength after immersion in water
|
90.93 | |
|
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)
|
95.99 | |
|
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model)
|
95.99 | |
|
Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
|
90.93 | |
|
Paper — Determination of folding endurance
|
90.93 | |
|
Paper — Determination of folding endurance
|
95.99 | |
|
Paper and board — Determination of smoothness (Bekk method)
|
95.99 | |
|
Paper and board — Determination of smoothness (Bekk method)
|
90.92 | |
|
Paper and board — Determination of smoothness (Bekk method) — Technical Corrigendum 1
|
60.60 | |
|
Paper and board — Determination of smoothness (Bekk method)
|
10.99 |
|
|
Paper and board — Determination of bending stiffness by static methods — General principles
|
95.99 | |
|
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
|
95.99 | |
|
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
|
90.93 | |
|
Paper and board — Determination of bending stiffness — Resonance method
|
95.99 | |
|
Paper and board — Determination of bending stiffness — Resonance method
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 1: Dry heat treatment
|
95.99 | |
|
Paper and board — Accelerated ageing — Part 1: Dry heat treatment at 105 degrees C
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity
|
95.99 | |
|
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
|
95.99 | |
|
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 4: Dry heat treatment at 120 or 150 degrees C
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
|
90.93 | |
|
Paper and board — Accelerated ageing — Part 7: Exposure to light
|
95.99 | |
|
Paper and board — Determination of resistance to water penetration
|
90.93 | |
|
Paper and board — Determination of grease resistance
|
95.99 | |
|
Paper and board — Determination of grease resistance — Technical Corrigendum 1
|
95.99 | |
|
Paper — Measurement of dimensional change after immersion in water
|
90.93 | |
|
Paper and board — Determination of air permeance (medium range) — Part 1: General method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 2: Schopper method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
|
90.93 | |
|
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
|
90.93 | |
|
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method — Technical Corrigendum 1
|
95.99 | |
|
Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method
|
95.99 | |
|
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
|
90.93 | |
|
Paper and board — Determination of air permeance (medium range) — Part 6: Oken method
|
90.93 | |
|
Paper and board — Determination of water absorption and increase in thickness after immersion in water
|
95.99 | |
|
Paper and board — Determination of water absorption after immersion in water
|
95.99 | |
|
Paper and board — Determination of water absorption after immersion in water
|
60.60 | |
|
Solid fibreboard — Determination of grammage of single layers
|
90.93 | |
|
Paper, board and pulps — Units for expressing properties
|
95.99 | |
|
Paper, board and pulps — Units for expressing properties
|
95.99 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute
|
90.93 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute
|
90.93 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
|
95.99 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
|
95.99 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
|
95.99 | |
|
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
|
95.99 | |
|
Testing of paper and board — Compressive strength of a sample held in S-shape
|
60.60 | |
|
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
|
95.99 | |
|
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
|
90.93 | |
|
Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
|
90.93 | |
|
Paper and board — Determination of microbiological properties — Part 1: Total bacterial count
|
95.99 | |
|
Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration
|
95.99 | |
|
Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration
|
90.93 | |
|
Pulp, paper and board — Microbiological examination — Part 2: Enumeration of bacteria, yeast and mould on surface
|
60.60 | |
|
Pulp, paper and board — Microbiological examination — Part 3: Enumeration of yeast and mould based on disintegration
|
60.60 | |
|
Paper and board — Determination of capillary rise — Klemm method
|
90.93 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
|
90.93 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
|
90.93 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
|
95.99 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
|
60.60 | |
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
|
60.60 | |
|
Paper and board — Compressive strength — Short span test
|
95.99 | |
|
Paper and board — Compressive strength — Short-span test
|
90.93 | |
|
Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
|
95.99 | |
|
Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
|
60.60 | |
|
Paper and board — Determination of air permeance — Low range
|
95.99 | |
|
Paper and board — Determination of curl using a single vertically suspended test piece
|
95.99 | |
|
Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1
|
95.99 | |
|
Paper and board — Determination of curl using a single vertically suspended test piece
|
90.93 | |
|
Paper and board — Calibration of variable-area flowmeters
|
95.99 | |
|
Paper and board — Compressive strength — Ring crush method
|
95.99 | |
|
Paper and board — Determination of compressive strength — Ring crush method
|
90.93 | |
|
Tissue paper and tissue products — Part 1: General guidance on terms
|
95.99 | |
|
Tissue paper and tissue products — Part 1: General guidance on terms
|
95.99 | |
|
Tissue paper and tissue products — Part 1: Vocabulary
|
90.93 | |
|
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density
|
95.99 | |
|
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
|
90.93 | |
|
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
|
95.99 | |
|
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
|
95.99 | |
|
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
|
60.60 | |
|
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
|
95.99 | |
|
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
|
95.99 | |
|
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
|
60.60 | |
|
Tissue paper and tissue products — Part 6: Determination of grammage
|
95.99 | |
|
Tissue paper and tissue products — Part 6: Determination of grammage
|
90.93 | |
|
Tissue paper and tissue products — Part 7: Determination of optical properties
|
95.99 | |
|
Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight)
|
95.99 | |
|
Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight)
|
60.60 | |
|
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method
|
95.99 | |
|
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
|
90.93 | |
|
Tissue paper and tissue products — Part 9: Determination of ball burst strength
|
95.99 | |
|
Tissue paper and tissue products — Part 9: Determination of ball burst strength
|
90.93 | |
|
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
|
95.99 | |
|
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
|
90.93 | |
|
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency
|
95.99 | |
|
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency
|
60.60 | |
|
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
|
95.99 | |
|
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
|
60.60 | |
|
Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method
|
95.99 | |
|
Tissue paper and tissue products — Part 16: Determination of optical properties — Diffuse reflectance method for opacity (paper backing)
|
60.60 | |
|
Tissue paper and tissue products — Part 17: Determination of disintegration in water
|
60.60 | |
|
Tissue paper and tissue products — Part 18: Determination of surface friction
|
60.60 | |
|
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
|
95.99 | |
|
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
|
95.99 | |
|
Paper, board and corrugated fibreboard — Description and calibration of fixed platen compression-testing equipment
|
60.60 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
|
95.99 | |
|
Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
|
60.60 | |
|
Paper and board — Measurement of water contact angle by optical methods
|
90.93 | |
|
Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
|
95.99 | |
|
Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
|
60.60 | |
|
Paper and board — Determination of the static and kinetic coefficients of friction — Horizontal plane method
|
90.93 | |
|
Paper and board — Determination of z-directional tensile strength
|
90.93 | |
|
Paper and board — Estimation of contraries
|
95.99 | |
|
Paper and board — Determination of internal bond strength
|
90.92 | |
|
Paper and board — Determination of internal bond strength
|
40.99 | |
|
Paper and board — Determination of grease resistance — Part 1: Permeability test
|
90.93 | |
|
Paper and board — Determination of grease resistance — Part 2: Surface repellency test
|
90.93 | |
|
Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
|
90.93 | |
|
Corrugating medium — Determination of the edge crush resistance after laboratory fluting
|
90.93 | |
|
Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)
|
90.93 | |
|
Paper, board and printing inks – Printability – Laboratory test method for offset ink setting
|
90.93 | |
|
Paper — Requirements for stability for general graphic applications
|
90.93 | |
|
Paper — Cut-size office paper — Measurement of edge quality
|
90.93 | |
|
Paper, board and graphic technology — Determination of the coating strength in the inner fold
|
60.60 | |
|
Paper and board — Stylus contact method — Part 1: Determination of surface roughness
|
60.60 |
No matching records found. Please try changing the filter settings.